We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The POE2000 helps quicken the installation and troubleshooting of PoE system devices. It can detect PSE-type/class, power source, polarity, voltage, current, power, and whether it is End Span (1/2, 3/6), Midspan (4/5, 7/8), or across all 4 pairs. If you are a VoIP phone and IP camera installer, you will know if there is power and a data pair available for your equipment. The useful test mode can distinguish if a standard PoE (36 to 60V) or non-standard (11 to 60V) passive PoE is being used. For inline power level monitoring the display alternates between Voltage, Current and Power and incorporates a step button for selecting specific data to display. No batteries required, the POE2000 uses system power when connected to a device.
Connector Interface | 2X RJ45 (PSE & PD Test Jacks) |
Voltage Range | Standard PoE: 36 to 60V; Non-Standard: 11 to 60V |
Max Current (based on 50V) | 990mA/50W per mode; Total 2A/100W |
Function Selection Mode | T Mode: for detecting PSE status |
N Mode: for determining non-standard PoE + inline testing | |
I Mode: for testing & monitoring real-time power status | |
Display | 4 LEDs indicate IEEE802.3af or 802.3at/bt standard |
Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both for bt | |
2 Yellow LEDs indicate reversed polarity for power type | |
Display alternates between Voltage, Current and Power | |
Step Button | For selecting specific data to display |
Power | Uses system power when connected to a device |
Dimensions/Weight | 3.9 x 1.4 x 1 ” (99 x 36 x 26mm)/1.6oz (45.4g) |
Write Your Own Review