We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Inor’s IsoPAQ-632 Signal Splitter/Repeater is essential for isolation, distribution and conversion of 0/4 … 20 mA, 0/1 … 5 V and 0/2 … 10 V standard signals. It boasts a measuring input that can supply the loop power for 2-wire transmitters.
Auxiliary power can be supplied through the optional In-Rail-Bus connector or through the connections terminals. The front of the unit displays a green LED to monitor the power supply.
Using the DIP switch on the IsoPAQ-632, the input and two isolated outputs can now be easily configured. The calibrated range selection makes the IsoPAQ-632 an efficient choice where no further adjustment is necessary.
Input | |
Input signal (calibrated switchable) | 0 … 20 mA, 0 … 10 V, 0 … 5 V 4 … 20 mA, 2 … 10 V, 1 … 5 V |
Input resistance | Current input: ≤ 35 Ω Voltage input: ≥ 100 kΩ |
Overload | Current input: < 50 mA Voltage input: < 30 V |
Transmitter supply Tx | 16 V (open circuit voltage/short circuit current ≤ 22 V/35 mA) |
Output I / Output II | |
Output signal (calibrated switchable) | 0 … 20 mA, 0 … 10 V, 0 … 5 V 4 … 20 mA, 2 … 10 V, 1 … 5 V |
Load | Current output: ≤ 6 V (300 Ω at 20 mA) Voltage output: ≤ 5 mA (2 kΩ at 10 V) |
Linear transmission range | –1 … +110 % |
Residual ripple | < 10 mVrms |
General Data | |
Transmission error | < 0.1 % full scale |
Temperature coefficient | < 100 ppm/K |
Cut-off frequency -3 dB | -3 dB 5 kHz |
Response time T99 | 150 µs |
Test voltage | 3 kV AC, 50 Hz, 1 min. Input against Output 1 against Output 2 against power supply |
Working voltage (Basic Insulation) | 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 |
Protection against electrical shock | Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits. |
Ambient temperature | Operation – 25 °C to + 70 °C (– 13 to + 158 °F) Transport and storage – 40 °C to + 85 °C (– 40 to + 185 °F) |
Power supply | 24 V DC voltage range 16.8 … 31.2 V DC, approx. 1.4 W |
EMC | EN 61326-1 |
Construction | 62 x 96,5 x 107 mm , protection class IP 20, mounting on 35 mm DIN rail acc. to EN 60715 |
Weight | Approx. 70 g |
Write Your Own Review