We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Isolation Transmitter IsoPAQ-161P is mainly used for isolation of bipolar signals, such as +/-20 mA, +/-10 mA, +/-10 V, +/-5 V, and conversion into unipolar output signals.
For applications where normally one signal combination only is used, IsoPAQ-161P offers a cost-effective alternative. The high reliability and the Protective Separation are further features, which ensure a safe system operation.
COMPACT LINE is a line of very compact and cost-optimized Isolators, Transmitter Repeaters and Isolating Transmitters within the IsoPAQ family.
The small dimensions - only 60 mm deep and 11.2 mm wide – and the favorable pricing allow for space saving and economic installations.
Input | ||||
Input signal 1) | ± 20 mA ± 10 V | ± 10 mA ± 5 V | 0-5 V | Factory set as ordered |
Input resistance | Current input Voltage input | 5 Ω 1 MΩ | ||
Overload | Current input Voltage input | ≤ 200 mA ≤ 250 V | ||
Output | ||||
Output signal 1) | 0-20 mA 0-10 V | 4-20 mA 0-5 V | Factory set as ordered | |
Load | Current output Voltage output | ≤ 500 Ω ≥ 2 kΩ | ||
Ripple | < 0.1 % of end value, ~ 100 kHz | |||
General data | ||||
Transmission error | ± 0.2 % of measuring span | |||
Temperature coefficient 2) | ± 0.02 %/K of measuring span | |||
Response time | < 5 ms | |||
Test voltage | 2.5 kV, 50 Hz | Between all circuits | ||
Working voltage 3) (Basic Insulation) | 600 VAC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010 part 1 between all circuits. | |||
Protection against electrical shock 3) | Protective separation acc. to EN 61140 by reinforced insulation acc. to EN 61010 part 1 up to 300 VAC/DC for overvoltage category II and pollution degre 2 between all circuits. | |||
Ambient temperature | Operation Transport and storage | 0 to +55 °C (32 to +131 °F) -25 to +80 °C (-13 to +176 °F) | ||
Power supply | 24 VAC/DC, ± 15 % | AC 48 to 62 Hz, approx. 2 VA DC approx. 0.7 W | ||
EMC 4) | EN 61326-1 | |||
Construction | 11.2 mm (0.44”) housing, protection class: IP20 | |||
Connection | ≤ 2.5 mm2, AWG 14 | |||
Weight | Approx. 50 g |
1) Other signals on request
2) Average TC in specified operating temperature range
3) As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
4) Minor deviations possible during interference