We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
While transferring the measurement signal to the output with a high degree of accuracy, the INOR IsoPAQ-611 provides galvanic separation for 0(4) … 20 mA standard signals. The IsoPAQ-611 has a very low drop voltage of 2.3 V and a high level of accuracy that works together. No additional power supply is needed since the auxiliary power is obtained from the input signal without distorting it. The IsoPAQ-611 is reliable and saves you money during installation.
Input | |
Input signal | 0(4)-20 mA |
Start-up current | < 200 mA |
Voltage drop | Approx. 2.3 V at 20 mA |
Overload | ≤ 50 mA, 30 V |
Output | |
Output signal | 0(4)-20 mA |
Load | 600 Ω |
Response time T99 | 5 ms |
Residual ripple | < 10 mVrms |
General Data | |
Transmission error | < 0.1 % full scale |
Load error | < 0.05 % of measured value / 100 Ω load |
Temperature coefficient | < 100 ppm/K |
Test voltage | 3 kV AC, 50 Hz, 1 min. all circuits against one another |
Working voltage (Basic insulation) | 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 |
Protection against electrical shock | Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits. |
Ambient temperature | Operation |
EMC | EN 61326-1 |
Construction | 62 x 96,5 x 107 mm , protection class IP 20, mounting on 35 mm DIN rail acc. to EN 60715 |
Weight | Approx. 70 g |