Hioki IM3536 8MHz LCR Meter

Measurement modes

LCR mode, Continuous measurement mode

Measurement parameters

Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ), σ, ε

Measurement range

100 mΩ to 100 MΩ, 10 ranges (All parameters are determined according to Z)

Display range

Z: 0.00 m to 9.99999 GΩ, Y: 0.000 n to 9.99999 GS, θ: ± (0.000° to 180.000°), Q: ± (0.00 to 9999.99), Rdc: ± (0.00 m to 9.99999 GΩ),
D: ± (0.00000 to 9.99999), Δ%: ± (0.000 % to 999.999 %), or other

Basic accuracy

Z ±0.05% rdg. θ: ±0.03° (representative value, Measurable range: 1 mΩ to 200 MΩ)

Measurement frequency

4 Hz to 8 MHz (5 digits setting resolution, minimum resolution 10 mHz)

Measurement signal level

[Normal mode: V mode/CV mode]
4 Hz to 1.0000 MHz: 10 mV to 5 V (maximum 50 mA)
1.0001 MHz to 8 MHz: 10 mV to 1 V (maximum 10mA)
[Low impedance high accuracy mode: V mode/CV mode]
4 Hz to 1.0000 MHz: 10 mV to 1 V (maximum 100 mA)
[Normal mode: CC mode]
4 Hz to 1.0000 MHz: 10 μA to 50 mA (maximum 5 V)
1.0001 MHz to 8 MHz: 10 μA to 10 mA (maximum 1 V)
[Low impedance high accuracy mode: CC mode]
4 Hz to 1.0000 MHz: 10 μA to 100 mA (maximum 1 V)
[DC resistance measurement]
Measurement signal level: Fixed at 1 V

DC bias measurement

Generating range: DC voltage 0 V to 2.50 V (10 mV resolution)
In low Z high accuracy mode: 0 V to 1 V (10 mV resolution)

Output impedance

Normal mode: 100 Ω, Low impedance high accuracy mode: 10 Ω

Display

5.7-inch color TFT with touch panel

Functions

Comparator, BIN measurement (10 categories for 2 measurement parameters), Trigger function, Open/short compensation, Contact check, Panel loading/saving, Memory function

Interfaces

EXT. I/O( HANDLER) ,USB, USB flash drive, LAN, GP-IB, RS-232C, BCD

Power supply

100 to 240 V AC, 50/60 Hz, 50 VA max.

Dimensions and mass

330 mm (12.99 in) W × 119 mm (4.69 in) H × 230 mm (9.06 in) D, 4.2 kg (148.1 oz)

Accessories

Power cord ×1, Instruction manual ×1, LCR application disc (Communications user manual) ×1