GW Instek GPT-9802 5000V AC - 6000V DC Hipot Tester and Safety Analyzer

SKU
GPT-9802
Manufacturer:
GW Instek

Key Features:

  • 200VA AC Test Capacity
  • 240x64 Ice Blue Dot matrix LCD
  • Manual/Auto Mode
  • Function Key for quick selecting
  • High intensity flash for Caution & Status indication
  • Safety INTERLOCK function
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up Time
  • True RMS Current Measurement
  • High resolution: 1uA for measuring current, 2V for setting voltage
  • PWM amplifier to enhance the power efficiency and reliable testing
  • Max. 100 memory block for test condition (step) setting. And each step can be named individually.
  • Remote terminal on the front panel for “start” and “stop” control
  • Interface : RS-232C, USB device, Signal I/O and GPIB (optional)
Product Options:
$1,555.00

Secured and trusted checkout with

The GPT-9800 Series look to meet a variety of safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety-related requirements for the safety tests of electronic products and components. The GPT-9802 is capable of performing both AC and DC withstanding tests, whereas the GPT-9801 is able to perform AC withstanding test. The series of safety tester is built upon a high-efficiency PWM amplifier platform with AC 200VA maximum output capacity to impede the influence from the voltage fluctuation of the input AC source. This ensures a stable voltage supply for all the tests of the GPT-9800 Series.


 

 

AC WITHSTANDING
Output-Voltage Range 0.100kV~ 5.000kV ac
Output-Voltage Resolution 2V/step
Output-Voltage Accuracy ± (1% of setting +5V) [no load]
Maximum Rated Load 200 VA (5kV/40mA)
Maximum Rated Current 40mA (0.5kV < V ≦ 5kV)10mA (0.1kV ≦ V≦ 0.5kV)
Output-Voltage Waveform Sine wave
Output-Voltage Frequency 50 Hz / 60 Hz selectable
Voltage regulation ± (1% of reading +5V) [full load → no load]
Voltmeter Accuracy ± (1% of reading+ 5V)
Current Measurement Range 0.001mA~040.0mA
Current Best Resolution 0.001mA / 0.01mA / 0.1mA
AC Current Measurement Accuracy ±(1.5% of reading +30 counts) when HISET < 1.00mA±(1.5% of reading +3 counts) when HISET ≧ 1.00mA
Window Comparator Method Yes
ARC Detect Yes
RAMP (Ramp-Up Time) 0.1~999.9s
TIMER (Test Time)* OFF, 0.5s~999.9s
GND ON/OFF

DC WITHSTANDING

Output-Voltage Range 0.100kV~ 6.000kV dc
Output-Voltage Resolution 2V/step
Output-Voltage Accuracy ± (1% of setting +5V) [no load]
Maximum Rated Load 50W (5kV/10mA)
Maximum Rated Current 10mA (0.5kV < V ≦ 6kV)2mA (0.1kV ≦ V≦ 0.5kV)
Voltage regulation ± (1% of reading +5V) [full load → no load]
Voltmeter Accuracy ± (1% of reading+ 5V)
Current Measurement Range 0.001mA~010.0mA
Current Best Resolution 0.001mA / 0.01mA / 0.1mA
DC Current Measurement Accuracy ±(1.5% of reading +30 counts) when HISET < 1.00mA±(1.5% of reading +3 counts) when HISET ≧ 1.00mA
Window Comparator Method Yes
ARC Detect Yes
RAMP (Ramp-Up Time) 0.1~999.9s
TIMER (Test Time)* OFF, 0.5s~999.9s
GND ON/OFF

INSULATION RESISITANCE

Output-Voltage 50V~1000V dc
Output-Voltage Resolution 50V/step
Output-Voltage Accuracy ± (1% of setting +5V) [no load]
Resistance Measurement Range 1MW~ 9500MW
  Test voltage Measurable Range Accuracy
  50V≦V≦450V 1MW~ 50MW51MW~ 2000MW ±(5% of reading +1 count)±(10% of reading +1 counts)
  500V≦V≦1000V 1MW~ 500MW501MW~ 9500MW ±(5% of reading +1 count)±(10% of reading +1 count)
Window Comparator Method Yes
Output Impedance 600kW
RAMP (Ramp-Up Time) 0.1~999.9s
TIMER (Test Time) 1s~999.9s
GND OFF (fixed)

GROUND BOND

Output-Current Range 03.00A~30.00A ac
Output-Current Resolution 0.01A
Output-Current Accuracy 3A≦I≦8A : ± (1% of setting +0.2A)8A<I≦30A : ± (1% of setting +0.05A)
Test-Voltage 6Vac max. (open circuit)
Test-Voltage Frequency 50 Hz / 60 Hz selectable
Resistance Measurement Range 10mW~650.0mW
Resistance Measurement Resolution 0.1mW
Resistance Measurement Accuracy ± (1% of reading +2mW)
Window Comparator Method Yes
TIMER (Test Time) 0.5s~999.9s
GND OFF (fixed)
Test Method Four Terminal

MEMORY

Single Step Memory MANU : 100 blocks
Automatic Testing Memory AUTO : 100 blocks, menu per auto : 16

INTERFACE

RS232 Standard
USB (Device) Standard
GPIB Option
Remote Terminal (Front) Standard
SIGNAL IO Standard

General

DISPLY 240 x 64 dot matrix LED back light LCD
POWER SOURCE AC100V/120V/220V/230V ±10%, 50/60Hz
POWER CONSUMPTION 500VA max.
DIMENSIONS & WEIGHT 330(W) x 148(H) x 452(D) mm (Max.),approx.19kg(Max)

* The “TIMER OFF” can only be performed when the tester is in the special MANU mode

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  • Safety Testing of Electrical Product in Manufacturing
  •    Power Cord

       Home Appliances

       Information Technology Equipment

       Medical Equipment

  • Quality Assurance Verification
  • Safety Standard Compliance
  • Pre-qualification in R&D
  • Products In This Series

    As low as

    Now $1,266.00