Skip to the beginning of the images gallery

Fluke i2000 Flex AC Current Clamp

Be the first to review this product

SKU

I2000 FLEX

Manufacturer:

Fluke

Key Features:

Three ranges: 20A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output

Ideal for current measurement on thick and hard to reach conductors without breaking the circuit

Maximum conductor diameter 178 mm

CAT III 600 V safety rating

Product Options:

Fluke Model I2000 FLEX Calibration Options

None

Calibration Not Included

Standard Calibration Certificate + $110.00

ISO 17025 Accredited Calibration Certificate (1000 Amps Max) + $145.00

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Qty

Special Price $503.99 Regular Price $559.99

Secured and trusted checkout with

Product Detail

Very large, flexible AC current clamp

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. The i2000 Flex is a flexible AC current probe for use with oscilloscopes and multimeters. The supplied Dual Banana to BNC Adapter can be used for connection to instruments with banana inputs. The i2000flex is optimized for current measurement on thick and hard to reach conductors.

Short Description

Electrical specifications
Current ranges	20 A 200 A 2000 A AC rms
Output sensitivity (AC-coupled)	1 mV 10 mV 100 mV 1 mV per A
Load impedance	100 kΩ minimum
Accuracy	at +25°C ±1% of range (45 Hz to 65 Hz)
Linearity	10% to 100% of range ±0.2% of reading
Noise	8 mV AC rms (30 A) 2 mV AC rms (300 A, 3000 A)
Frequency range	10 Hz to 20 kHz (-3 dB)
Phase error	< ±1° (45 Hz to 65 Hz) ±10° (at 20 kHz)
Position sensitivity	with cable > 25 mm from the coupling ±2% of range
External field	with cable > 200 mm from the head ±1% of range
Power supply	2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
Temperature Coefficient	±0.08% of reading per °C
Working voltage	see Safety standards section 600 V AC rms or DC
General Specifications
Head Circumference	610 mm (24 in)
Head cable diameter	14.3 mm (0.56 in)
Head bend radius	38.1 mm (1.5 in)
Cable length (head to electronics)	2 m (6.56 ft)
Output connection	Molded 4 mm safety plugs (not integrated)
Operating temperature range	0°C to +70°C (32°F to 158°F) (head and electronics)
Storage temperature range	-40°C to +105°C (-40°F to 221°F) (head) -20°C to +85°C (-4°F to 185°F) (electronics)
Operating humidity	15% to 85% (non-condensing)
Weight	180 g (6.34 oz) (head) 190 g (6.70 oz) (electronics)
Safety standards	EN 61010-031: 2002 EN 61010-2-032: 2002 EN 61010-1: 2001 600 Vrms, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz.
EMC standards	EN 61326: 1998 +A1, A2, and A3
Dimensions (H x W x D)	116 x 68.5 x 30 mm (4.56 x 2.69 x 1.18 in)