Fluke Calibration 9150 Thermocouple Furnace

SKU
FLUKE-9150
Manufacturer:
Fluke Calibration
Fluke Calibration

Key Features:

  • Very High Temperature Dry Block Calibrator
  • Rapid heating and cooling
  • 8 set-point memory
  • 150°C to 1200°C temperature range
  • LED Temperature Readout
  • Adjustable readout in °C or °F
  • ±5°C display accuracy
  • Stability of ±0.5°C
  • Equipped with RS-232 port
  • 4 interchangeable multi-hole inserts
Product Options:
$10,770.00

Secured and trusted checkout with

The Fluke Calibration 9150 high temperature dry block thermocouple furnace can be used for calibrating thermocouple and RTD temperature sensors and probes at very high temperatures. The 9150 calibrator furnace was designed for portability, low cost, and ease of operation. Calibrations may be handled over a range of 150°C to 1200°C (302°F to 2192°F). The 9150’s temperature display shows 0.1 degrees resolution below 1000°and 1 degrees resolution above 1000°. The temperature is accurately controlled by the 9150’s analog/digital controller. The controller uses a Type S thermocouple as a sensor and controls the well temperature with a solid state relay (Triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The calibrator’s multiple fault protection insure user and instrument safety and protection. The 4 available interchangeable insert options and removable well insert make it versatile for a variety of application demands. The furnace works with 115 or 230 VAC power, offers quick cool-down and heat-up times and can be connected to a PC via the RS-232 port.

Temperature range

150°C to 1200°C
(302°F to 2192°F)

Display resolution

0.1° to 999.9°
1° above 1000°

Stability

±0.5°C

Display accuracy

±5°C

Well diameter

1.25 in(32 mm)

Well depth

140 mm (5.5 in); (101 mm [4 in] removable insert plus 38 mm [1.5 in] insulator)

Heating time

35 minutes to 1200°C

Cooling time

140 minutes with block

Well-to-well uniformity

±2.5°C (Insert “C” at 1200°C)

Stabilization

20 minutes

Power

115 V AC (±10%), 10.5 A or 230 V AC (±10%), 5.2 A, switchable, 50/60 Hz, 1200 W

Size (H x W x D)

315 x 208 x 315 mm
(12.4 x 8.2 x 12.4 in)

Weight

13 kg (28 lb)

 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  • High Temperature Thermocouple Calibration
  • High Temperture RTD Calibration