We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Flowline EchoPod DS14 provides continuous level detection up to 49.2 (1.25m) with 4 programmable relays for level switch or level control functions, and is configured via our free WebCal software. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is broadly selected for small day tank, skid, IBC, sump and process tank level applications.
Range: | 49.2” (1.25m) |
Accuracy: | 0.125” (3mm) |
Resolution: | 0.019” (0.5mm) |
Dead band: | 2” (5cm) |
Beam width: | 2” (5cm) |
Configuration: | WebCal® PC |
Windows® USB 2.0 | |
Memory: | Non-volatile |
Supply voltage: | 12-24 VAC / VDC |
Consumption: | 0.5W |
Contact type: | (4) SPST relays, 1A |
Contact fail-safe: | Power loss: Hold last |
Power on: Open, close | |
or hold last | |
Hysteresis: | Selectable |
Process temp.: | F: 20° to 140° |
C: -7° to 60° | |
Temp. comp.: | Automatic |
Ambient temp.: | F: -31° to 140° |
C: -35° to 60° | |
Pressure: | MWP = 30 PSI (2 bar) |
Enclosure rating: | Type 6P, encapsulated, |
corrosion resistant & | |
submersible | |
Encl. material: | Polycarbonate |
Strain relief mat: | Santoprene |
Trans. material: | PVDF |
Cable jacket mat: | Polyurethane |
Cable type: | 9-conductor, shielded |
Cable length: | 48” (1.2m) |
Process mount: | 1” NPT (1” G) |
Mount gasket: | Viton® |
Classification: | General purpose |
Compliance: | CE, RoHS |
Approvals: | cFMus |
Write Your Own Review