Flowline EchoPod DL14 1.25m Ultrasonic Multi-Function Transmitter, Switch & Controller

SKU
DL14
Manufacturer:
Flowline
Flowline

Key Features:

  • Switch and control functions with continuous level measurement output up to 49.2' (1.25m)
  • Configuration is fast and easy via WebCal software and USB adapter
  • Narrow 2" beam width and short 2" dead band optimized for small tanks
  • Four (4) programmable relays rated @ 1A / 60VA for switch, pump or valve control and fail-safety: 1 pump or valve with 3 alarms, 2 pumps (lead-lag) with 2 alarms, 2 pumps (duplexing) with 2 alarms, 4 independent switch point alarms
  • PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
  • Automatic temperature compensation for accurate measurement
Product Options:
$450.00

Secured and trusted checkout with

The EchoPod DL14 1.25m Ultrasonic Multi-Function Transmitter, Switch & Controller is an ultrasonic sensor hich provides non-contact level detection up to 49.2" (1.25m) with 4 SPST 60 VA 1A relays and a two-wire 4-20 mA level measurement output.  Each relay can be configured on a single set point alarm or latched on two sets for automatic fill or empty in simplex or duplex control modes with fail-safe logic. The embedded controller can replace external control hardware. The sensor is well suited for a wide range of corrosive, sticky or dirty type media. EchoPod is broadly selected for small atmospheric day tank, skid or process vessel, lift station, IBC, drum and sump applications. To configure EchoPod, download our free WebCal software and purchase one USB interface tool.

Range:49.2" (1.25m)
Accuracy:0.125" (3mm)
Resolution:0.019" (0.5mm)
Dead band:2" (5cm)
Beam width:2" (5cm)
Configuration:WebCal® PC Windows® USB 2.0 USB 2.0
Memory:Non-volatile
Supply voltage:24 VDC (loop)
Consumption:0.5W
Loop resist.:400Ω max
Signal output:4-20 mA, two-wire
Signal invert:4-20 mA or 20-4 mA
Signal fail-safe:4 mA, 20 mA, 21 mA,
22 mA or hold last
Contact type:(4) SPST relays
Contact rating:60 VA, 1A maximum
Contact fail-safe:Power loss: Hold last
Power on: Open, close
or hold last
Hysteresis:Selectable
Process temp.:F: 20° to 140°
C: -7° to 60°
Temp. comp.:Automatic
Ambient temp.:F: -31° to 140°
C: -35° to 60°
Pressure:MWP = 30 PSI (2 bar)
Enclosure rating:Type 6P, encapsulated,
corrosion resistant & submersible
Encl. material:Polycarbonate
Strain relief mat.:Santoprene
Trans. material:PVDF
Cable jacket mat.:Polyurethane
Cable type:9-conductor, shielded
Cable length:48" (1.2m)
Process mount:1" NPT (1" G)
Mount gasket:Viton®
Classification:General purpose
Compliance:CE, RoHS
Approvals:cFMus


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  • Corrosive, Sticky or Dirty Type Media
  • Small Atmospheric Day Tank
  • Skid or Process Vessel
  • Lift Station
  • IBC
  • Drum and Sump