We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The FLIR TA74 Universal Flex Current Probe has an 18 inch (45.72cm) flex coil length and a 4.7 inch (12cm) max conductor diameter capacity. The flexible coil clamp is essential for applications that require measurements to be taken in tight places; places a traditional hard jaw clamp meter would not be able to access. Its tangle-free, light weight and portable design make it even easier to transport from place to place whenever necessary. The TA74 works with most DMMs and clamp meters, no matter the brand, as a result of the standard banana plug connection and a voltage signal output, making it the perfect addition to your existing meter.
Measurement | |
Maximum AC current | 3000A |
AC current ranges and resolution | 30.00A, 300.0A, 3000A |
Basic AC current accuracy (full scale) | ± 3.0% + 5 digits |
Measurement Rate | 1.5 samples per second, nominal |
AC current bandwidth | 45Hz – 500Hz (sine wave) |
Positional error (distance from optimum) | 1.4” (35mm) ±1.0% |
Meter Data | |
Minimum requirements for meter compatibility with TA72 | AC voltage function 4000 count display 1mV resolution |
Max conductor diameter capacity | 4.7" (12cm) |
Flex coil length | 18" (45 cm) |
Flex coil diameter | 0.3” (7.5mm) |
Flex coil tip diameter | 0.5” (13mm) |
Probe length | 73" (1.9m) |
Work light | Two white LEDs |
Power supply | (2) 1.5V “AAA” |
Drop test | 9.8' (3m) |
Agency approvals | CE, UL |
Safety rating | CAT IV 600V,CAT III 1000V |
Standards | EN61010‐1, EN61010‐2‐032, EN61326-1 |
Warranty | Limited lifetime with registration |