Dwyer Series MS2 Magnesense® II Differential Pressure Transmitter

SKU
MS2
Manufacturer:
Dwyer
Dwyer

Key Features:

  • Field selectable ranges and dual output signal
  • Available in Wall, Duct or DIN rail mounting
  • BACnet® or Modbus® serial communications
  • Reduce wiring cost by daisy-chaining transmitters
  • Available with integral field upgradeable display
  • Optional plug-in remote display
  • Reads in metric or English units
  • Built-in square root extraction for flow applications
Call For Price

Secured and trusted checkout with

The Series MS2 Magnesense® II Differential Pressure Transmitter combines the proven stable Hall Effect sensing technology of our original Series MS with additional features to reduce installation time and simplify ordering. In this second generation transmitter, we have added additional field selectable pressure ranges so that each model can have four selectable ranges along with four additional bidirectional ranges. When using the plug-in integral display or the portable remote display tool, both Metric and English engineering units can be selected via on board dip switches. Dual current and voltage outputs allow users to simultaneously take either a current or voltage output to their building controller and have a local test circuit for verification of the output reading. The voltage output can be selected to be either 0 to 5 VDC or 0 to 10 VDC, while the current is always 4 to 20 mA. Both the current and voltage output can also be inverted. The MS2 can also be ordered with either a BACnet® or MODBUS® Communications protocol output that will allow the transmitters to be daisy-chained together.

 Like the original Series MS, the second generation transmitter can be used as a linear pressure output or a linear velocity output with the square root extraction done in the transmitter. Additional parameters have been included to expand the square root capability to include flow measurements.

Supported Baud Rates:
9600, 19200, 38400, 57600, 76800, 115200.
Data Size:
8.
Parity:
None.
Stop Bits:
1.
Service:
Air and non-combustible, compatible gases.
Wetted Materials:
Consult factory.
Typical Accuracy:
±1% FS for 0.15" (40 Pa), 0.25" (50 Pa), 0.5" (100 Pa), 2" (500 Pa), 3" (750 Pa), 5" (1250 Pa), 10" (2 kPa), 15" (3 kPa), 25" (5 kPa), 28" (6.975 kPa); ±2% FS for 0.1" (25 Pa), 1" (250 Pa), and all bi-directional ranges.
Stability:
±1% / year FSO.
Temperature Limits:
0 to 150°F (-18 to 66°C).
Pressure Limits:
1 psi max., operation; 10 psi burst.
Power Requirements:
10 to 35 VDC (2-wire), 17 to 36 VDC or isolated 21.6 to 33 VAC (3-wire).
Output Signals:
4 to 20 mA (2-wire), 0 to 5 VDC, 0 to 10 VDC (3-wire).
Response Time:
Adjustable: 0.5 to 15 sec. time constant. Provides a 95% response time of 1.5 to 45 seconds.
Zero & Span Adjustments:
Digital push buttons.
Loop Resistance:
Current Output: 0 to 1250 Ω max;
Voltage Output: Min. load resistance 1 kΩ.
Current Consumption:
40 mA max.
Display (Optional):
5 digit LCD.
Electrical Connections:
3-wire removable European style terminal block for 16 to 22 AWG.
Electrical Entry:
1/2" NPS thread.
Process Connection:
3/16" ID tubing (5 mm ID); Max. OD 9 mm.
Enclosure Rating:
IP66.
Mounting Orientation:
Diaphragm in vertical position.
Weight:
8.0 oz (230 g).
Agency Approvals:
BTL, CE.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  • Duct Static Pressure in Commercial Buildings
  • Fan Testing & Proving
  • Filter Monitoring of Air Handling Units
  • Building Pressure in Pharmaceutica Clean Rooms
  • Semi-Conductor Clean Rooms
  • Air Velocity/Flow in VAV Systems