We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The DH3 controller is a perfect tool for pressure, velocity and flow applications. The DH3 ranges from 0.25" w.c. to 100" w.c. and it is also available in bi-directional ranges. Given a 4-20 mA process output the controller uses 2 SPDT control relays with adjustable deadbands. It is simple to access the 5 menus that gives you access to the security level; selection of pressure, velocity or flow operation, engineering units; and K-factor for use with flow sensors. See more info in the pdf datasheet.
- Service:
- Air and non-combustible, compatible gases.
- Wetted Materials:
- Consult factory.
- Housing Material:
- Die cast aluminum case and bezel.
- Accuracy:
- ±1.5% for 0.25" and ±0.25" w.c. ranges. Ranges 0.5" to 5" w.c. and corresponding bi-directional (except ±2.5" w.c.) ±1%; All other ranges: ±0.5% @ 77°F (25°C) including hysteresis and repeatability (after 1 hour warm-up).
- Stability:
- < ±1% per year.
- Pressure Limits:
- Ranges ≤ 2.5 in w.c.: 25 psi; ±2.5", 5 in w.c.: 5 psi; 10 in w.c.: 5 psi; 25 in w.c.: 5 psi; 50 in w.c.: 5 psi; 100 in w.c.: 9 psi.
- Temperature Limits:
- 32 to 140°F (0 to 60°C).
- Compensated Temperature Limits:
- 32 to 140°F (0 to 60°C).
- Thermal Effects:
- 0.020%/°F (0.036/°C) from 77°F (25°C). For 0.25" and ±0.25" w.c. ranges: ±0.03%/°F (±0.054%/°C).
- Power Requirements:
- 12-28 VDC, 12-28 VAC 50 to 400 Hz.
- Power Consumption:
- 3 VA max.
- Output Signal:
- 4-20 mA DC into 900 ohms max.
- Zero & Span Adjustments:
- Accessible via menus.
- Response Time:
- 250 ms (damping set to 1).
- Display:
- Backlit 4 digit LCD 0.4" height LED indicators for set point and alarm status.
- Electrical Connections:
- 15 pin male high density D-sub connection. 18" (46 cm) cable with 10 conductors included. 4' and 10' cables available.
- Process Connections:
- 1/8" female NPT. Side or back connections.
- Mounting Orientation:
- Mount unit in vertical plane.
- Size:
- 5" (127 mm) OD x 3-1/8" (79.38 mm).
- Weight:
- 1.75 lb (794 g).
- Agency Approvals:
- CE.
- SWITCH SPECIFICATIONS
- Switch Type:
- 2 SPDT relays.
- Electrical Rating:
- 1 amp @ 30 VAC/VDC.
- Set Point Adjustment:
- Adjustable via keypad on face.
Write Your Own Review
- SCFM flow in ducts
- Filter status
- Static pressures in ducts or buildings
- Damper control
- Fan control