We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
DENT Instruments’s CT-SCS-0100-U Standard Small Split Core Current Transformer is configured for 100 Amp loads and is constructed with a 0.75” window. Providing linear output voltage directly proportionate to the input current, the CT-SCS-0100-U maintains a typical accuracy of ±1% (measured from 10% to 130%).
The CT creates 333mV at full scale. DENT has designed the CT-SCS-0100-U for safer working practices. The shunted CT can be easily installed over already existent electrical power lines. Now, installation worries of disturbing service or severing lines are eliminated.
The CT-SCS-0100-U can be used with both the PowerScout and ELITEpro series.
Window Size | 0.75” (1.90 cm) |
Current Range | 2 - 130A AC |
Output | 333 mV at rated current |
Ratio Error | <1% at rated current (typical) |
Phase Error | <2° at rated current (typical) |
ELECTRICAL | |
Output | 333 mV at rated current |
Wire Polarity | White = Hi, positive (+) Black = Low, negative (‐) |
Frequency Range | 50 to 400 Hz |
MECHANICAL | |
Case Material | Epoxy encapsulated housing |
Leads | 2.7 M (8’), twisted pair, 20 AWG |
Operating Temperature | –20° to 55°C (-4° to 131°F) |
SAFETY | |
Working Voltage | 600 VAC Category III |
Dielectric Strength | 5000 VAC around case 600V rated leads |
Safety Standards | Conforms to: UL STD 61010-1 EN 60044-1 Certified to: CAN/CSA STD C22.2 No. 61010-1 |
- • Building Automation
- • New Technology Assessment
- • Performance Verification
- • Energy Management
- • Tenant Submetering