We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
DENT Instruments’ CT-SCS-0050-U Standard Small Split Core Current Transformer is equipped for 50 Amp loads and designed with a 0.75” window. With a typical accuracy of ±1% (measured from 10% to 130%), the split core CT generates linear output voltage that is directly related to the input current.
As with all split core CTs, the shunted CT-SCS-0050-U produces 333mV at full scale. For even safer working practices, the current transformer can be installed over already present electrical power lines, eradicating the risk of disrupting service or severing lines.
The CT-SCS-0050-U can be used with both the PowerScout and ELITEpro series.
Window Size | 0.75” (1.90 cm) |
Current Range | 5 - 65A AC |
Output | 333 mV at rated current |
Ratio Error | <1% at rated current (typical)
|
Phase Error | <2° at rated current (typical) |
ELECTRICAL | |
Output | 333 mV at rated current |
Wire Polarity | White = Hi, positive (+) Black = Low, negative (‐) |
Frequency Range | 50 to 400 Hz |
MECHANICAL | |
Case Material | Epoxy encapsulated housing |
Leads | 2.7 M (8’), twisted pair, 20 AWG |
Operating Temperature | –20° to 55°C (-4° to 131°F) |
SAFETY | |
Working Voltage | 600 VAC Category III |
Dielectric Strength | 5000 VAC around case 600V rated leads |
Safety Standards | Conforms to: UL STD 61010-1 EN 60044-1 Certified to: CAN/CSA STD C22.2 No. 61010-1 |
- • Building Automation
- • Performance Verification
- • Tenant Submetering
- • New Technology Assessment
- • Energy Management