We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Configured for 600 Amp loads, DENT Instruments offers their CT-SCM-0600-U Standard Medium Split Core Current Transformer. The CT produces output voltage precisely comparative to the input current, while sustaining a typical accuracy of ±1% (measured from 10% to 130%).
The CT-SCM-0600-U has a 333mV output at rated current. The shunted current transformer has the advantageous capability of being installed over already present electrical power lines, eliminating the likelihood of service interruptions or the disconnection of lines.
The CT-SCM-0600-U is compatible with both the PowerScout and ELITEpro series.
Window Size | 1.25” (3.20 cm) |
Current Range | 12—780A AC |
Output | 333 mV at rated current |
Ratio Error | <1% at rated current (typical) |
Phase Error | <2° at rated current (typical) |
ELECTRICAL | |
Output | 333 mV at rated current |
Wire Polarity | White = Hi, positive (+) Black = Low, negative (‐) |
Frequency Range | 50 to 400 Hz |
MECHANICAL | |
Case Material | Epoxy encapsulated housing |
Leads | 2.7 M (8’), twisted pair, 20 AWG |
Operating Temperature | –20° to 55°C (-4° to 131°F) |
SAFETY | |
Working Voltage | 600 VAC Category III |
Dielectric Strength | 5000 VAC around case 600V rated leads |
Safety Standards | Conforms to: UL STD 61010-1 EN 60044-1 Certified to: CAN/CSA STD C22.2 No. 61010-1 |
- • Building Automation
- • Performance Verification
- • Energy Management
- • New Technology Assessment
- • Tenant Submetering
Products In This Series
As low as
Now $105.00