We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Configured for 1000 Amp loads, DENT Instruments has designed their CT-SCL-1000-U Standard Large Split Core Current Transformer. The shunted current transformer provides linear output voltage directly proportional to the input current. The CT produces 333mV at full scale, and boasts a typical accuracy of ±1% (measured from 10% to 130%).
As part of DENT’s series of “large” CTs, the CT-SCL-1000-U has been constructed with a 2.0” window size. Even more, for efficiency and safety, the current transformer can be installed over already present electrical power lines.
The CT-SCL-1000-U is compatible with both the ELITEpro and PowerScout series from DENT Instruments.
Window Size | 2.0” (5.1 cm) |
Current Range | 20 - 1300A AC |
Output | 333 mV at rated current |
Ratio Error | <1% at rated current (typical) |
Phase Error | <2° at rated current (typical) |
ELECTRICAL | |
Output | 333 mV at rated current |
Wire Polarity | White = Hi, positive (+) Black = Low, negative (‐) |
Frequency Range | 50 to 400 Hz |
MECHANICAL | |
Case Material | Epoxy encapsulated housing |
Leads | 2.7 M (8’), twisted pair, 20 AWG |
Operating Temperature | –20° to 55°C (-4° to 131°F) |
SAFETY | |
Working Voltage | 600 VAC Category III |
Dielectric Strength | 5000 VAC around case 600V rated leads |
Safety Standards | Conforms to: UL STD 61010-1 EN 60044-1 Certified to: CAN/CSA STD C22.2 No. 61010-1 |
- • Performance Verification
- • Building Automation
- • Tenant Submetering
- • New Technology Assessment
- • Energy Management
Products In This Series
As low as
Now $88.00