We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
As part of their “Large” Split Core series, DENT Instruments has designed the CT-SCL-0600-U 600 Amp Standard Split Core Current Transformer with a 2.0” window size. The CT can be installed over already existent electrical power lines, making installation quicker and safer.
The current transformer works by providing linear output voltage directly proportionate to the input current, while holding a typical accuracy of ±1% (measured from 10% to 130%).Even more, the CT-SCL-0600-U is shunted and has a 33mV output at full scale.
The CT-SCL-0600-U is compatible with both the ELITEpro and PowerScout series.
Window Size | 2.0” (5.1 cm) |
Current Range | 30 - 780A AC |
Output | 333 mV at rated current |
Ratio Error | <1% at rated current (typical) |
Phase Error | <2° at rated current (typical) |
ELECTRICAL | |
Output | 333 mV at rated current |
Wire Polarity | White = Hi, positive (+) Black = Low, negative (‐) |
Frequency Range | 50 to 400 Hz |
MECHANICAL | |
Case Material | Epoxy encapsulated housing |
Leads | 2.7 M (8’), twisted pair, 20 AWG |
Operating Temperature | –20° to 55°C (-4° to 131°F) |
SAFETY | |
Working Voltage | 600 VAC Category III |
Dielectric Strength | 5000 VAC around case 600V rated leads |
Safety Standards | Conforms to: UL STD 61010-1 EN 60044-1 Certified to: CAN/CSA STD C22.2 No. 61010-1 |
- Performance Verification
- Energy Management
- New Technology Assessment
- Tenant Submetering
- Building Automation