We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Configured specifically for 200 Amp loads and structured with a 1.0” window size, DENT Instruments is offering their CT-HMC-0200-U 200 Amp Midi Standard Hinged Split Core Current Transformer. Designed for limited spaced working environments, the shunted CT provides linear output voltage that is precisely proportional to the input current, while boasting a (<0.5%) high accuracy.
Installation is safer and simpler, with the CT-HMC-0200-U’s ability to be installed over existing electrical power lines. Now, users can eliminate the stress and worry of disrupting service or disconnecting lines. High accuracy, advanced performance and the versatility the CT-HMC-0200-U 200 offers, sustains DENT Instruments as one of the top CT manufacturers in the industry.
The CT-HMC-0200-U is compatible for use with both the ELITEpro and PowerScout series.
Window Size | 25 mm (1.0”) |
Current Range | 1 - 300A AC |
Output | 333 mV @ 200 A AC 1.67 mV/A AC |
Ratio Error | <1.0 % from 1.0 A to 300 A AC (typical) |
Phase Error | <0.5° from 1.0 A to 300 A AC |
ELECTRICAL | |
Output | 333 mV @ 200 A |
Wire Polarity | White = Hi, positive (+) Black = Low, negative (‐) |
Phasing | Arrow on Case Points |
Orientation | Toward Load |
Frequency Range | 50 to 400 Hz |
MECHANICAL | |
Case Material | White Nylon, UL 94 V‐0 |
Leads | 2.4 M (8’), 600V, 22 gage |
Operating Temperature | -15 to 60°C (5 to 140°F)
|
Storage Temperature | -20 to 85°C (-4 to 185°F) |
SAFETY | |
Working Voltage | 600 VAC Category III |
Dielectric Strength | 5200 VAC for 1 minute |
Safety Standards | UL STD 61010‐1 CAN/CSA STD C22.2 No. 61010‐1 |
- • Demand Metering
- • Load Surveys
- • Submetering
- • Energy Research
- • Energy Management
Products In This Series
As low as
Now $82.00As low as
Now $34.00