We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Offering all the features and functions of their CPF line of quick-test pressure fittings, Crystal Engineering has introduced their MPF-AN4M CPF Pressure Fitting with an AN4 male connector.
See the other range of CPF Fittings and Hoses from Crystal Engineering below.
(A) 0.63" (16 mm)
(B) 1.35" (34 mm)
PERFORMANCE | ||
Maximum Allowable Working Pressure (MAWP): | 10 000 psi / 700 bar / 70 MPa | Most fittings thoughout this document meet the MAWP specificaton of 10000 psi / 700 bar / 70 MPa. Exceptions are labeled with an icon ( 5 or 15 ) and a key to indicate the pressure rating. Non-Crystal MP adapters require wrench tightening. |
Finger-tight: | -20 to 50°C | |
Wrench-tight: | -40 to 150°C | |
Minimum Hose Bend Radius: | 1.0" (25mm) | |
CONSTRUCTION | ||
Thread Type: | 7/16-20 UNF 2B | |
Cone Angle: | 60°, nominal | |
Fittings: | High Strength 316 Stainless Steel | Hose is not compatible with dioctyl sebacate fluid. |
Hose: | Polyamide core with urethane jacket | |
External Hose Diameter: | 0.235" (6 mm) | |
Internal Hose Diameter: | 0.08" (2 mm) | |
Hose Weight: | 0.0179 lbs/ft (26.6 g/m) | CAUTION: To achieve CPF maximum allowable working pressures no o-ring substitutions are allowed. |
CPF Female O-rings: | AS568A-012, Viton® 80 or 90 #3981 | |
O-ring Lubricant: | Molykote® 55 | |
RECOMMENDATIONS | ||
Thread Lubricant: | Use a process compatible fluid | |
Wrench Torque: | 100–140 in-lbs (11.3–15.8 Nm) | If a torque wrench isn’t practical to use, hand tighten then tighten an additional 20 degrees using a wrench. |
Write Your Own Review