We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Bacharach’s Monoxor Plus 0019-8117 Carbon Monoxide Analyzer is an essential tool for monitoring CO in ambient air or stack gases. The Monoxor Plus 0019-8117 is equipped with features designed for efficiency like a trending graph that shows real-time value, the capability to log a 15 minute CO ambient test and minimum and maximum measured values.
Down time is eliminated with the B-Smart pre-calibrated sensors that allow for fast replacement in the field. More still, optional thermocouple accessories are available that enable the analyzer to measure ambient and flue gas temperatures and a NOx filter for even more precise CO readings in flue gas applications.
All kits include:
- • Probe with 12 in. sample tube (approximately 6 ft. total length), water trap and particulate filter
- • 4x AA batteries
- • User manual
- • Hard carrying case
Measurements: CO Temperature (optional)[1] |
0 to 2000 ppm -4 to 1202 °F (-20 to 650 °C) |
Display | Graphic LCD w/backlight |
Power | 4x AA batteries |
Run Time | 20 hours minimum (alkaline batteries) |
Size (H x W x D) | 8.0 x 3.6 x 2.3 in. (20.3 x 9.1 x 5.8 cm) |
Weight | 1 lb. (0.45 kg) including batteries |
Operating Conditions | 23 to 113 °F (-5 to 45 °C), 15 to 95% RH (non-condensing), 1 ATM ± 10% |
Warm-up Time | 30 to 60 seconds |
Memory | 10 locations |
Communications | USB 2.0 (mini-B), IrDA |
Approvals | CE mark |
Warranty | 2 years (including sensor) |
[1] Temperature measurement requires an optional probe (P/N 0019-7111) or thermocouple (P/N 0104-1797 or 0104-1798)