We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
SR752 is a general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have voltage inputs. It has a voltage output proportional at the rate of 1mV per amp to the current measured in the jaw of the probe. The SR752 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs.
ELECTRICAL | |
Nominal Range | 1000A |
Measurement Range | 100mA to 1200A |
Transformation Ratio | Voltage output |
Output Signal | 1mVAC/AAC (1VAC @ 1000A) |
Accuracy (1000A Range) | |
0.1 to 1A | ≤2% of Reading ± 3μV |
1 to 10A | <1% of Reading |
10 to 100A | ≤0.5% of Reading |
100 to 1200A | ≤0.3% of Reading |
Phase Shift (1000A Range) | |
1 to 10A | ≤2° |
10 to 100A | ≤1° |
100 to 1200A | ≤0.7° |
Overload | 1200A for 40 min ON, 20 min OFF |
Frequency Range | 30Hz to 5kHz; current derating above 1kHz using the formula: 1000A x 1F (in kHz) |
Load Impedance | 100kΩ min |
Working/Common Mode Voltage | 600Vrms Cat. III |
Output Termination | 5 ft Lead |
MECHANICAL | |
Operating Temperature | -14° to 122°F (-10° to 50°C) |
Storage Temperature | -4° to 158°F (-20° to 70°C) |
Operating Relative Humidity | 0 to 85% @ 35°C |
Jaw Opening | 2.25" (57mm) max |
Maximum Conductor Size | 2.05" (52mm) |
Maximum Bus Bar Size | One 1.95 x 0.19" (50 x 5mm) |
Dimensions | 4.37 x 8.50 x 1.77" (111 x 216 x 45mm) |
Weight | 1.21 lbs (550g) |
Polycarbonate Material | Handles: Polycarbonate + ABS, Gray, UL94 V0. Jaws: Polycarbonate, Red, UL94 V0 |
SAFETY | |
Electrical | EN 61010-2-032 |
UL Approval | Yes – Canada and United States |
Double Insulation | Yes |
CE Mark | Yes |
Note: Reference conditions: 23 ± 3°K, 20 to 75% RH, 48 to 65Hz, external magnetic field <40A/m, no DC component, no external current carrying conductor, test sample centered. Load impedance 1Ω.
Write Your Own Review