We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
AEMC’s MR526 is a hall effect current probe with 2 ranges built for DMM and Data loggers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plug and can measure up to 1000AAC and 1400ADC. The MR526 is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied).
| Maximum Conductor Size | 1.53” (39mm) or 2 bus bar 1.96 x 0.19” (50 x 5mm) |
| Current Range | 0.5 to 100AAC, 150ADC & 0.5 to 1000AAC, 1400ADC |
| Output Signal | 10mV/A & 1mV/A via a 5ft (1.5m) lead with 4 mm safety banana plug |
| Accuracy 50/60Hz | ≤1.5% @ 100A & ≤2.5% @ 800A |
| Frequency Range | DC to 30kHz (-3dB) (depending of current value) |
| Phase Shift At 50Hz | ≤2°@ 100A ≤1.5° @ 800A |
| Load Impedance | >1MΩ and ≤100pF |
| Overload | 3000ADC or 1000AAC continuous for < 1kHz |
| Zero Adjust | Automatic on both ranges |
| Power Supply | 9V alkaline Battery (NEDA 1060A, 6LR61) or 5V DC Micro-USB type B |
| Battery Life | 50H typical |
| Low Battery Indication | Green LED blinking |
| Overload Indication | Red LED on when measurement > than selected range |
| Dimensions (H x W x D) | 9.31 x 3.82 x 1.73” (236.5 x 97 x 44mm) |
| Weight (with Battery) | 1.15lbs (520g) |
| Operating Temperature | 14° to +131°F (-10 to +55°C) |
| Storage Temperature | -40° to +176°F (-40 to +80°C) |
| Relative Humidity | Up to 85% @ 35°C |
| Ingress Protection (Ip) | IP 40 |
| EMC | EN 61326-1 |
| Safety Compliance | IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III CE |
Write Your Own Review
Products In This Series
As low as
Now $350.00
As low as
Now $365.00
As low as
Now $389.00