We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The AEMC MR417 is a hall effect current probe with 2 ranges specifically crafted for oscilloscopes, waveform displaying instruments, and other frequency sensitive displaying instruments with BNC inputs. The probe is equipped with a 6.5 ft (2m) lead terminated by a BNC connector and can measure up to 400AAC and 600ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied).
| Maximum Conductor Size | 1.18” (30mm) or 2 bus bar 1.24 x 0.39” (31.5 x 10mm) |
| Current Range | 0.5 to 40AAC, 60ADC & 0.5 to 400AAC, 600ADC |
| Output Signal | 10mV/A & 1mV/A via a 6.5ft (2m) lead BNC cable |
| Accuracy 50/60Hz | ≤1.5% @ 40A & ≤2% @ 400A |
| Frequency Range | DC to 30kHz (-3dB) (depending of current value) |
| Phase Shift At 50Hz | ≤2°@ 40A & ≤1.5° @ 400A |
| Load Impedance | >1MΩ and ≤100pF |
| Overload | 3000ADC or 1000AAC continuous for < 1kHz |
| Zero Adjust | Automatic on both ranges |
| Power Supply | 9V alkaline Battery (NEDA 1060A, 6LR61) or 5V DC Micro-USB type B |
| Battery Life | 50H typical |
| Low Battery Indication | Green LED blinking |
| Overload Indication | Red LED on when measurement > than selected range |
| Dimensions (H x W x D) | 8.82 x 3.82 x 1.73” (224 x 97 x 44mm) |
| Weight (with Battery) | 0.98lbs (440g) |
| Operating Temperature | 14° to +131°F (-10 to +55°C) |
| Storage Temperature | -40° to +176°F (-40 to +80°C) |
| Relative Humidity | Up to 85% @ 35°C |
| Ingress Protection (Ip) | IP 40 |
| EMC | EN 61326-1 |
| Safety Compliance | IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III CE |
Write Your Own Review
Products In This Series
As low as
Now $340.00
As low as
Now $360.00
As low as
Now $419.00