We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The AEMC MR415 is a hall effect current probe with 1 range specified for DMM, Data loggers and Power Analyzers. The MR415 comes equipped with a 5 ft (1.5m) lead terminated by 4mm safety banana plugs and can measures up to 400AAC and 600ADC. The probe is run by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied).
Maximum Conductor Size | 1.18” (30mm) or 2 bus bar 1.24 x 0.39” (31.5 x 10mm) |
Current Range | 0.5 to 400AAC, 600ADC |
Output Signal | 1mV/A via a 5ft (1.5m) lead with 4 mm safety banana plug |
Accuracy 50/60Hz | ≤2% @ 400A |
Frequency Range | DC to 30kHz (-3dB) (depending of current value) |
Phase Shift At 50Hz | ≤1.5°@ 400A |
Load Impedance | >1MΩ and ≤100pF |
Overload | 3000ADC or 1000AAC continuous for < 1kHz |
Zero Adjust | Automatic on both ranges |
Power Supply | 9V alkaline Battery (NEDA 1060A, 6LR61) or 5V DC Micro-USB type B |
Battery Life | 50H typical |
Low Battery Indication | Green LED blinking |
Overload Indication | Red LED on when measurement > than selected range |
Dimensions (H x W x D) | 8.82 x 3.82 x 1.73” (224 x 97 x 44mm) |
Weight (with Battery) | 0.98lbs (440g) |
Operating Temperature | 14° to +131°F (-10 to +55°C) |
Storage Temperature | -40° to +176°F (-40 to +80°C) |
Relative Humidity | Up to 85% @ 35°C |
Ingress Protection (Ip) | IP 40 |
EMC | EN 61326-1 |
Safety Compliance | IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III CE |
Write Your Own Review
Products In This Series
As low as
Now $365.00As low as
Now $429.00As low as
Now $389.00