We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The AEMC K110 DC/AC micro current probe measures as low as 100µA AC or DC. The unit has proportional mV output for direct readings on any DMM with a milli-volt range. The high accuracy K110 is ideal for calibration of current loop process instruments (i.e., 4 to 20mA or 0 to 20mA). The 2111.73 is also available with an optional calibration certificate.
| ELECTRICAL | |
| Nominal Range | 0 to 300mArms/0 to ±450mAdc |
| Measurement Range | 0 to ±450mA |
| Output Signal | 10mV/mA |
Accuracy (450mA Range) AC |
±0.8% of Reading ± 200μA |
| Overload | Red LED indicates momentary or continuous overload |
| Frequency Range | DC to 1.5kHz (@ -3dB sine) |
| Load Impedance | 200Ω |
| Working/Common Mode Voltage | 300V, EN 61010-1, Cat. II |
| Battery | 9V Alkaline, NEDA 1604, 6LR61 or IEC 6 LF22 (Approx. 20 hours life) |
| Output Termination | 4mm Safety Banana Plugs |
| MECHANICAL | |
| Operating Temperature | -14° to 131°F (-10° to 55°C) |
| Storage Temperature | -40° to 176°F (-40° to 80°C) |
| Operating Relative Humidity | <95% @ ≤ 35°C, 75% @ 55°C |
| Zero Adjustment | ±25mA approx. by 10 turn knob at base of case |
| Maximum Conductor Size | 3/16", 0.180" (4.5mm) |
| Dimensions | Probe: 4.4 x 0.6 x 1.0" (111 x 15 x 25mm); Electronic Module: 4.9 x 2.5 x 1.1" (124 x 64 x 28mm) |
| Weight | 9 oz (250g) |
| SAFETY | |
| Electrical | EN 61010-2-32 |
| Double Insulation | Yes |
| CE Mark | Yes |
Note: Reference conditions: 23°C ±3°C, 20 to 75%RH, battery voltage 9V ±0.1V; earth’s magnetic field <40A/m; absence of AC fields;
input impedance of display device ≥ 1MΩ/100pF; DC or sinusoidal AC current 45 to 65Hz.
Write Your Own Review
- • Ground and leakage current measurement
- • Industrial process controls (4 to 20mA current loops)
- • Electronic circuit design, testing and repair
- • FAA Repiar Facilities for avionics systems maintenance and repair
- • UL Panel building and trouble-shooting
- • Automobile wiring and engine control systems
- • Fault and signal location in complex networks
- • Pre-deployment testing of power-conscious equipment