Texmate FL-B101D40PS Leopard Bargraph PSF Meter

Our Price: $185.00

Item Number: FL-B101D40PS

Manufacturer: Texmate

Part Number: FL-B101D40PS

Product Options

* denotes required field

Texmate Bargraph Display Configuration*

Texmate DPM Power Supply Options*

Texmate AC Input Selection*

Texmate DC and Process Input Selection*

Texmate Frequency Input Selection*

Texmate Linear/Position Input Selection*

Texmate Pressure Input Selection*

Texmate Process Input Selection*

Texmate Resistance Input Selection*

Texmate Temperature Input Selection*

Texmate DPM Analog Output*

Texmate DPM Relay Output*

NIST Calibration - Digital Bargraph Meter*

Quantity:

Email this page to a friend

View Larger Image

Texmate FL-B101D40PS Leopard Bargraph PSF Meter

This smart Tricolor or Mono-color digital bargraph with programmable scale factor has four fully programmable set points for monitoring, measurement, and control applications.

Features:

External transmitters or signal conditioners can be eliminated by direct connection of the sensor output to more than 40 Plug-in Input Signal Conditioners that include:
- AC/DC Current    - Pressure      - Resistance
- AC/DC Voltage    - Process       - Temperature
- Load Cell            - Prototype     - 4 to 20 mA
Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital span from +/- one count to the full scale range of - 1999 to 9999 (12000 counts).
A Programmable Tricolor (Red-Green-Orange) or mono color (red or green), 101 segment high brightness bargraph.Vertical or optional horizontal format.
Red 4-digit LED display with a range of -1999 to 9999 (12000 counts). Optional green digital display.
Front panel LED annunciators provide indication of setpoint status.
Two 10 Amp Form C, and two 5 Amp Form A relays available
Auto-sensing AC/DC power supply. For voltages between 85-265 V AC / 95-370 V DC (PS1) or 18-48 V AC / 10-72 V DC (PS2).
24 V DC excitation is available to power external 4/20mA transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors.
Provision to connect an external programming lockout switch.
Provision for external DIM switch to reduce the brightest display setting by 50%.
Optional NEMA-4 front cover.
Automatic intelligent averaging, smooths noisy signals while providing a fast display response to real level changes.

Software Features:

The bargraph can display, full scale, any desired portion of the digital reading.
Bargraph center zero function.
Four programmable setpoints with adjustable Hysteresis.
Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Hysteresis Band between SP1 and SP2.
Relay activation can be selected to occur above (hi) or below (Lo) each setpoint.
Digital display blanking.
Decimal point setting.
Four-level brightness control accessed by the button and adjusted by the button

Specifications:

Case Dimensions: