Texmate DL-40F Leopard Frequency Meter

Texmate DL-40F Leopard Frequency Meter

Features:

• Frequency input. Easily user scaled.
• For RPM measurements, the recommended meter is the DL-40RPM meter which has been designed specifically for that purpose. Just enter the pulses per revolution and the DL- 40RPM meter will calculate and display the RPM reading.
• Three frequency ranges of 99.99Hz, 999.9Hz and 9999Hz.
• Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital span from +/- one count to the full scale range of - 1999 to 9999 (12000 counts).
• Auto-sensing AC/DC power supply. For voltages between 85-265 V AC / 95-370 V DC (PS1) or 15-48 V AC / 10-72 V DC (PS2).
• Standard red or optional green or super bright red 4-digit LED
• Red or green 0.8” LED large display option.
• Four annunciator LEDs provide front panel alarm status indication for up to four setpoints.
• Optional relays. Two 10 Amp Form C and two 5 Amp Form A relay, or optionally four 5 Amp Form A relays are available.

Software Features:

• Three-button programming from the front panel (UP, DOWN and PROGRAM buttons).
• Three front panel selectable ranges.
• Front panel selectable four-level brightness control of digital display, and setpoint LEDs.
• Four programmable setpoints.
• Relay activation can be selected to occur above (HI) or below (LO) each setpoint.
• Hysteresis setting for all four setpoints. Delay on make and delay on break for SP1 and SP2.
• Peak and Valley. View and Reset.

Specifications:

Case Dimensions: