Martel MC-1000 Process Calibrator

The Martel MC-1000 has been replaced by the new Martel MC-1010 (Click here for Details)

   The Martel MC-1000 Multi-Function Calibrator provides the combination of a high accuracy calibrator and common DMM functions. This single instrument will calibrate virtually any process device - read and source thermocouples, RTDs, Ohms, Voltage, current, frequency, pressure and test continuity as well. The MC-1000 is compatible with 29 Fluke® 700 Series pressure modules with the addition of a simple connector/adapter.  The MC-1000 features a simple user interface, large display, and an RS232 interface.  

Features:

• Excellent Accuracy +/-0.4 C T/C
• Choose either Read or Source Modes
• Operates with Fluke External Pressure Modules
• 10 T/C Types; 8 RTD Types Plus YSI 400 Series Thermistor, (Medical Applications)
• Full Function 4 to 20mA Read, Source, Simulate and Read/Power Modes
• 0.015% Reading Accuracy
• Source 0 to 20 Volts or Read 0 to 20 Volts
• Measure 0 to 250 VDC or VAC
• Direct Keyboard Entry Allows for Quick Output Changes
• Store Up to Nine Setpoints for Each Output Function
• RTD Function Works with all Pulsed XMTR's(including Rosemont)
• RS232 Interface for Remote Operation
  Technical Specifications:
  

  Pressure Ranges	Various Ranges in 29 Different Pressure Modules
  T/C Ranges	J, K, T, E, R, S, N, B, L, U including - 10 to 70mV
  RTD Ranges	Pt 385 (100, 200, 500, 1000 ohms) Pt 392, JIS, Ni120, Cu-10, YSI-400 (Thermistor)
  Ohms Ranges	0 to 100.00 and 400.0 to 4000.0
  mA Range	0 to 24.000 mA
  Voltage	(Low) Read 0-20.000 VDC Source 0-10.000 VDC (High)Read only 0-250VDC or VAC
  Frequency	0-1000.0CPM 0-1000.0Hz 0-10.00KHz
  Continuity	0 to 400.0 ohms, audible tone when under 10 ohms
  Accuracy	T/C Type J: +/-3 C +/-10 uV (+/-0.4 C total error) RTD PT100:+/-1 C +/-0.75 Ohm(+/-0.3 C total error) Ohms (400): +/-0.1 Ohm Ohms (4000): +/-1.0 Ohm
  mA Compliance	Up to 1000 Ohm load
  Voltage Drive Capability	1 mA
  RTD IEX-range	0.01 mA to 3 mA
  RTD Frequency Response	10 mS- works with all pulsed XMTR's
  Oper. Temp.	-10 C to 50 C
  Storage Temp.	-20 C to 70 C
  Loop Power	4 AA alkaline batteries, 25 hours typical operating time
  Size	7.5" x 4" x 1.5"