Intempco M23A Industrial Temperature Sensor & Extension Cable

Our Price: $230.00

Item Number: M23A

Manufacturer: Intempco

Part Number: M23A

* denotes required field

Calibrated Temperature Range Selection*

Output Selection*

Probe Dia. "D", Mat'l, & Length "L" Selection*

Extension Length "C" Selection*

Fitting Type*

Extension Cable & Length Selection*

Quantity:

Intempco M23A Industrial Temperature Sensor with Extension Cable

Features:

Applications:

Most common selections shown above, call (732) 632-6400 for additional options.

Specifications:

Electrical Properties
Input:	RTD, type Pt100
Sensor Temperature Ranges:	See Box 1 code for standard ranges. Field re-selectable between -200°C to 600°C or -50°C to 200°C, depending on model
Output:	4-20mA loop powered, linear to temperature
Power Supply:	12-32VDC, polarity protected
Suppply Effect:	0.001 %/V
Accuracy:	±(0.25°C + 0.40% of span) with one point calibration¹ ±(0.10°C + 0.10% of calibrated span with two-point calibration²
Maximum Loop Resistance:	[(Vsupply -7) * 40] ohms
Sensor Open Circuit:	Upscale 24mA or Downscale 2.5mA
Warmup:	30 Seconds
RFI Effect:	1% or less typical
Isolation:	500 VDC Input/Output
Temp. Effects:	±0.001% of Span/°C
Long Term Drift:	<0.1% FS/Year

Mechanical Properties
Probe and Housing Material:	Stainless steel 316, welded to probe
Cable Material:	PVC, Teflon or stainless steel armor over Teflon
Protection:	NEMA 6P (IP67), hermetically sealed
Storage Temp. Range:	-40°C to 80°C
Operating Temp. Range:	-40°C to 80°C (housing only)
Maximum Operating Pressure:	1500 PSIG Max (probe only) 500 PSIG (Tri-clamp)
Standard Surface Finish:	Polished to #4 finish per 3-A standard 74-02, 32 micro-inches max.
Pharmaceutical Surface Finish:	Polished to mirror finish and passivated, 10 micro-inches typical

¹Max. error on complete span. Error at calibration point <0.1% of Span.

²Max. error on complete calibration span. Error at calibration points <0.1% of Span.

M23A: