|
| | |
|
| |
| | |
|
|
Fluke i400 400 A AC Current Probe
|
Item Number: I400
Manufacturer: Fluke
Part Number: I400
|
|
Fluke 400i 400 A AC Current Probe
Fluke Current clamps are the ideal tools to extend the functionality of Fluke tools. The i400 is a single range 400 A ac current clamp with current output via safety shrouded banana plugs. The clamp is compatible with most Fluke multimeters or any other current measurement device that accepts 4mm-shrouded banana plugs and has an AC milliamp range. The division ratio is 1000:1.
Features:
- Companion to your DMM to measure up to 400 A AC
- 1mA/Amp output garantuees easy reading on you meter
- Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
- Specially designed to offer maximum utility in a very compact shape
- Take accurate current readings without breaking the circuit
- Soft non-slippery overmold handle prevents form accidental touching live wiring
- Max. conductor diameter 32 mm
| Specifications |
| Nominal current range |
400A |
| Continuous current range |
1 A - 400 A |
| Maximum Non-Destructive Current |
1000 A |
| Lowest measurable current |
1 A |
| Basic accuracy |
|
2% + 0.06 A |
|
(45-400 Hz) |
|
(% reading + floorspec) | |
| Useable frequency |
5 Hz - 20 kHz |
| Output level(s) |
1 mA/A |
| Safety Specifications |
| Safety |
CAT IV 600 V, CAT III, 1000 V |
| Maximum voltage |
1000 V AC rms from earth to ground, in compliance with EN61010 |
| Mechanical & General Specifications |
| Warranty |
1 year |
| Maximum conductor diameter |
32 mm (1.25 inches) |
| Maximum conductor size (busbar) |
750 MCM |
| Output cable length |
1.5 m (59 inches) |
| Shrouded banana plugs |
Yes | |
|
|
|