Fluke 1577 Insulation Multimeter

Whether you work on motors, generators, cables, or switch gear, the Fluke 1577 Insulation Multimeter is ideally suited to help you with your tasks and at a cost that is far less than buying two products.

Features: 

• Large display with backlight
• Insulation test  0.1 MOhm to 600 MOhm
• Insulation test voltages 500 V, 1000 V for many applications
• Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
• Auto-discharge of capacitive voltage for added user protection
• AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (Ohm), Continuity
• Auto power off to save battery power
• CAT III 1000 V, CAT IV 600 V measurement category
• Included accessories: Remote probe, test leads and probes, alligator clips
• Accepts optional Fluke TPAK™ magnetic hanging system to free your hands for other work
• Rugged, utility hard case allows you to bring everything you need for the job

Fluke 1577/1587 Comparison:

Fluke 1587/1577 Insulation Multimeters

Specifications
Voltage DC	Maximum Voltage: 1000 V Accuracy: 1577: +/-(0.2%+2) 1587: +/-(0.09%+2) Maximum Resolution: 0.001V
Voltage AC	Maximum Voltage: 1000 V Accuracy: 1577: +/-(2%+3) 1587: +/-(2%+3) AC Bandwidth: 1587: 5kHz* *with low pass filter; 3db @ 800 Hz Maximum Resolution: 0.1 mV
Current DC	Maximum Amps: 400mA Amps Accuracy: 1577: +/-(1.0%+2) 1587: +/-(0.2%+2) Maximum Resolution: 0.01 mA
Current AC	Maximum Amps: 400mA Amps Accuracy: 1577: +/-(2.0%+2)* 1587: +/-(1.5%+2)* * 1kHz bandwidth Maximum Resolution: 0.01 mA
Resistance	Maximum Resistance: 50 M-Ohm Accuracy: 1577: +/-(1.2%+2) 1587: +/-(0.9%+2) Maximum Resolution: 0.1-Ohm
Capacitance(1587 only)	Maximum Capacitance: 9,999 uF Accuracy: +/-(1.2%+2) Maximum Resolution: 1 nF
Frequency (1587 only)	Maximum Frequency: 100 kHz Accuracy: +/-(0.1%+1) Maximum Resolution: 0.01 Hz
Temperature Measurement (1587 only)	-40.0 DegC to 537 DegC -40.0 DegF to 998 DegF excluding probe
Diode Test (1587 only)	Range: 6 V Resolution: 1 mV Accuracy: +/-(2 % + 1)

 

Insulation Test
Minimum Test Current @ 1k-Ohm/V:	1mA
Test Voltages:	1577: 500, 1000 V 1587: 50, 100, 250, 500, 1000 V
Maximum Resistance per Test Voltage:	50V: 100V: 250V: 500V: 1000V: 1577: 600 M-Ohm 1587: 2 G-Ohm
Maximum Resolution per Test Voltage:	50V: 0.01 M-Ohm 100V: 0.01 M-Ohm 250V: 0.1 M-Ohm 500V: 0.1 M-Ohm 1000V: 0.1 M-Ohm
Accuracy per Test Voltage:	50V: +/-(3 % + 5) 100V: +/-(3 % + 5) 250V: +/-(1.5 % + 5) 500V: 1577: +/-(2.0 % + 5) 1587: +/-(1.5 % + 5) 1000V: 1577: +/-(2.0 % + 5) 1587: +/-(1.5 % + 5) to 600 M-Ohm, +/-(10 % + 3) above 600 M-Ohm

Environmental Specifications
Operating temperature	–20 DegC to +55 DegC
Storage temperature	-40 DegC to +60 DegC
Humidity (Without Condensation)	0% - 95% (10 DegC - 30 DegC) 0% - 75% (30 DegC - 40 DegC) 0% - 40% (40 DegC - 55 DegC)
Operating Altitude	2000 m

 

Safety Specifications
Overvoltage category	Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V
Agency Approvals	2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V

Fluke 1577 Insulation Multimeter Includes:

• Remote probe
• Test leads
• Alligator clips
• Hard case
• Four AA alkaline batteries
• Quick Reference Guide
• CD Rom with Manual