|
| | |
|
| |
| | |
|
|
Fluke 1750 Three-Phase Power Recorder
|
|
Item Number: 1750
Manufacturer: Fluke
Part Number: 1750
Product Options
* denotes required field
Calibration - Power Meter*
|
Fluke 1750 Three-Phase Power Recorder
Never miss capturing a disturbance — with the exclusive threshold-free measurement system, it’s automatic. Capture every measurement, every event, on every cycle, all the time with the Fluke 1750 Power Recorder. Outstanding accuracy and resolution provide complete visibility into your installation or distribution system.
Fluke 1750 Features:
-
Power quality that meets the standard: All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc.
-
Quick and reliable configuration: PDA wireless “front panel interface” provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations
-
Threshold-free set up: Apply thresholds after data is collected with Fluke Power Analyze Software – no need to worry about missed information due to incorrect setups
-
Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time
-
Intuitive PC software: Easily analyze data and generate reports with automated EN50160 reporting and compliance
-
Plug and play: Set up in minutes with self-identifying current probes and single-lead voltage connections
-
No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct
-
Measure every parameter: Voltage and current on three phases, neutral, and ground
-
5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events
-
Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection
Fluke 1750 Applications:
-
Long-term analysis: Uncover hard-to-find or intermittent issues; monitor critical equipment, capturing power quality events to correlate with equipment malfunction
-
Power quality surveys: Quantify power quality throughout a facility, documenting results with professional reports
-
Quality of service compliance: Validate incoming power quality at the service entrance
-
Equipment Installation/Commissioning: Benchmark power system prior to install to insure quality of service
Fluke 1750 is Easy to Use:
The recorder automatically detects, scales, and powers current probes without needing batteries. Requiring only single-lead voltage connections enables safe and quick setups. Once power is applied the instrument automatically begins recording and LEDs give you assurance that the recorder is powered up and signals are within range – no more uncertainty that data is being recorded. The Fluke 1750 has an exclusive capture algorithm which makes certain all events are captured without the tedious setups and blind spots associated with threshold driven equipment.
The PDA wirelessly interfaces with the recorder, allowing quick setup and verification with waveform displays, meter screens, and phasor diagrams. The built-in wireless technology allows you to control multiple instruments from a distance easily, without the need for a laptop computer (laptops can also be used when desired).
|
|
|
|
|
View measurements real-time with wireless PDA interface.
|
Configurations are simple with wiring diagrams to guide you.
|
No need to reconnect wires—swap channels internally using the PDA interface.
|
Comprehensive Power System Data:
Every cycle on every channel is simultaneously sampled providing complete analysis of power quality, harmonics, power and energy. Cross-channel current and voltage triggering captures event data on all input channels simultaneously, no matter which channel triggered the event. When periodic analysis of the waveform may be needed, the Snapshot mode captures waveforms at userdefined intervals. Even dc signals can be recorded!
|
|
|
|
Events can be displayed against a variety of tolerance curves
|
Full FFT on each channel to the 50th harmonic
|
|
|
|
|
Display multiple parameters simultaneously on one graph
|
Full-featured power meter display for each channel and totals
|
|
|
|
|
Thresholds for EN50160 report are easily customized
|
EN50160 report delivers an easy to read pass
or fail chart along with drill down data
|
Powerful Data Management:
Data is automatically stored on the internal flash memory that can store records for over a month without compression or overwriting. Data is retrieved via one of two quick and easy options: download the data onto the included SD memory card without using your laptop, or transfer directly to your computer via Ethernet, using TCP/IP protocol. Voice, data, and picture annotations can be made via the PDA to flag important points in the data stream. Imagine being able to flag in your recorded data when a transfer switch was operated, or load changes were made.
Fluke 1750 Specifications:
Fluke 1750 Includes:
-
1750 acquisition unit
-
PDA wireless “front panel interface” and charger power plug adapters
-
4 - 400A current probes (3140)
-
5 Test leads and clips
-
SD memory card
-
Fluke Power View and Fluke Power Analyze software
-
Power cord with international plug set
-
Ethernet cable
-
Color localization set
-
Printed Getting Started manual
-
Product CD with software and user manual PDF
-
CS 1750/1760 Rugged transit softcase
|
|
|
|