Search

Fluke Online Store

Martel Beta Online Store

Reed Instruments Online Store

Extech Online Store

Browse Categories
Browse by Manufacturer

Flowline EchoPod DL14 1.25m Ultrasonic Multi-Function Transmitter, Switch & Controller

Flowline EchoPod DL14 1.25m Ultrasonic Multi-Function Transmitter, Switch & Controller

Our Price: Starting at $350.00
Manufacturer: Flowline
Part Number: DL14

Product Options

Flowline EchoPod DL14 1.25m Ultrasonic Multi-Function Transmitter, Switch & Controller

The general purpose, ultrasonic sensor provides non-contact level detection up to 49.2" (1.25m) with 4 SPST 60 VA 1A relays and a two-wire 4-20 mA level measurement output. Each relay can be configured on a single set point alarm or latched on two sets for automatic fill or empty in simplex or duplex control modes with fail-safe logic. The embedded controller can replace external control hardware. The sensor is well suited for a wide range of corrosive, sticky or dirty type media. EchoPod is broadly selected for small atmospheric day tank, skid or process vessel, lift station, IBC, drum and sump applications. To configure EchoPod, download our free WebCal software and purchase one USB interface tool.

Flowline EchoPod DL14 Features:
  • Multi-function sensor provides 4-20 mA measurement, relay switch and control functions
  • Compact sensor with 2" beam width and 2" dead band optimized for small tank applications
  • Four 1A relays programmable for switch or advanced pump or valve control and fail-safety functions including:
    • 2 pumps with 2 alarms
    • 1 pump with 3 alarms
    • 2 pumps (lead-lag) with 2 alarms
    • 2 pumps (duplexing) with 2 alarms
    • 4 independent switch point alarms
  • Rugged PVDF transducer and polycarbonate enclosure rated 6P for corrosive applications
Flowline EchoPod DL14 Specifications:

Specifications
Range:
49.2" (1.25m)
Accuracy:
0.125" (3mm)
Resolution:
0.019" (0.5mm)
Beam width:
2" (5cm)
Dead band:
2" (5cm)
Supply voltage:
24VDC (loop)
Loop resistance:
400Ω max
Consumption:
0.5W
Signal output:
4-20 mA two-wire
(when loop powered)
Contact type:
(4) SPST relay 1A
Loop fail-safety:
4 mA, 20 mA, 21 mA,
22 mA or hold last
Relay fail-safety:
Power loss: Hold last
Power on: Open, close
or hold last
Hysteresis:
Selectable
Configuration:
WebCal® PC Windows®
USB 2.0
Temp. comp.:
Automatic over range
Process temp.:
F: 20° to 140°
C: -7° to 60°
Ambient temp.:
F: -31° to 140°
C: -35° to 60°
Pressure:
MWP = 30 PSI
Enclosure:
Type 6P
encapsulated, corrosion
resistant & sumbersible
Encl. material:
PC/ABS FR
Strain relief mat.:
Santoprene
Trans. material:
PVDF
Cable length:
48" (1.2m)
Cable jacket mat.:
Polyurethane
Process mount:
1" NPT (1" G)
Mount. gasket:
Viton®
Classification:
General Purpose
Approvals:
cFMus, CE
Compliance:
RoHS
 
Shopping Cart
Your cart is empty.
Mailing Lists
See Our New Infrared Imager and Camera Section

Products