|
| | |
|
| |
| | |
|
|
Dwyer Minihelic II Differential Low Pressure Gage
Manufacturer: Dwyer
Part Number: 2-5000 Series
Product Options
* denotes required field
Dwyer Minihellic Pressure Range Selection*
Dwyer Minihellic Connection Size*
Minihelic Calibration Service Option
|
|
Dwyer Minihellic Series II Low Differential Pressure Gauge
Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic® II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic® II is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" I.D. tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic® II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost.
With the housing molded from mineral and glass filled nylon and the lens molded from polycarbonate, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic® II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic® II finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic® II gage is suitable for many of the same applications as the Magnehelic® gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic® gage are not required.
Specifications:
Service: Air and compatible gases
Wetted Materials: Consult factory
Housing: Glass filled nylon; polycarbonate lens
Accuracy: +/-5% of full scale at 70°F (21.1°C)
Pressure Limits: 30 psig (2.067 bar) continuous to either pressure connection
Temperature Limits: 20 to 120°F (-6.67 to 48.9°C)
Size: 2-1/16" (52.39 mm) diameter dial face
Mounting Orientation: Diaphragm in vertical position
Process Connections: Barbed, for 3/16" I.D. tubing or 1/8" male NPT
Weight: 6 oz (170.1g)
Dwyer Minihelic II Available Ranges:
| EXAMPLE
|
2-5000-0
|
AT
|
Series 2-5000-0-AT Minihelic® II Differential Pressure Gage, range 0-.5" w.c., with aluminum tag.
|
| RANGE
|
2-5000-0
2-5001
2-5002
2-5003
2-5005
2-5010
2-5020
2-5040
2-5060
2-5080
2-5100
2-5205
2-5210
2-5215
2-5000-25MM
2-5000-50MM
2-5000-100MM
2-5000-125PA
2-5000-250PA
2-5000-500PA
2-5000-750PA
2-5000-1KPA
2-5000-3KPA
2-5000-5KPA
|
|
0-.5" w.c.
0-1" w.c.
0-2" w.c.
0-3" w.c.
0-5" w.c.
0-10" w.c.
0-20" w.c.
0-40" w.c.
0-60" w.c.
0-80" w.c.
0-100" w.c.
0-5 psid
0-10 psid
0-15 psid
0-25 mm w.c.
0-50 mm w.c.
0-100 mm w.c.
0-125 Pa
0-250 Pa
0-500 Pa
0-750 Pa
0-1 kPa
0-3 kPa
0-5 kPa
|
| OPTIONS
|
|
AT
BB
NIST
NPT
|
Aluminum Tag
Bottom Barb Connection
NIST Certificate of Calibration
NPT Connection
|
|
|
|
|