|
| | |
|
| |
| | |
|
|
Amprobe AT-3500 Underground Cable and Pipe Locator
|
|
Item Number: AT-3500
Manufacturer: Amprobe
Part Number: AT-3500
|
Amprobe AT-3500 Underground Wire, Cable & Pipe Locator
The Amprobe AT-3500 Underground Cable/Pipe Locator System will keep productivity high and operational costs. It’s the rugged, economical solution for locating underground energized and de-energized wires, cables and pipe. The Amprobe AT-3500 is great for parking lots and airport lighting applications., It precisely pinpoints buried services, with exceptionally fast sound and meter response.
The backlit multiple-segment bar-graph digital display plus audible indicators shows and tells all. The AT-3500 employs the proven 33 kHz frequency for most locating applications. To avoid lines at utility construction sites, it also offers the highly sensitive power and radio modes. The AT-3500 also takes depth measurements with the press of a button.
- Locates underground energized and de-energized wires, cables and pipes
- Three testing modes for best accuracy
- – Passive Power (50 / 60 Hz)
- – Passive Radio (RF)
- – Active T-3500 signal generator with induction mode directly connected to the cable with test leads or optional clamp
- Active Mode Depth measurement up to 16’ (4.9m)
- Semi-automatic gain control – fast signal location and control
- 33 kHz active frequency – best frequency for general locating
- Precise pinpointing of buried services and exceptionally fast sound and meter response with backlight multiple multiple-segment
- Complete instrument, ready for use with receiver, transmitter, connection cable, ground stake and ground cable
|
Depth measurement
|
16 ft
|
|
Passive tracing frequencies
|
50 Hz / 60 Hz
|
|
Transmitter frequency
|
Single, non-adjustable
|
|
Receiver active frequencies (Hz)
|
32.768 kHz
|
|
Receiver passive frequencies (Hz)
|
Range 1: radio 15 kHz to 23 kHz
Range 2: power network 50 Hz / 60 Hz;
optionally 100 Hz (can be adjusted by Amprobe service personnel)
|
|
Receiver depth display accuracy
|
Range 1: radio +/- 20 %
Range 2: power network +/- 20 %
Range 3: transmitter +/- 5 % (>5m (6-FT)),
+/- 20 % (<5m (15-FT))
|
|
Receiver depth range
|
Maximum 16 ft (488 cm)
|
|
Receiver antenna (distance sensitive left/right guidance)
|
-
|
|
Line ID (signal select, guidance compass, distortion alert)
|
-
|
|
Specifications
|
|
Depth measurement:
|
10 ft
|
|
Passive tracing frequencies:
|
50 / 60 Hz
|
|
Transmitter frequency:
|
Single, non-adjustable
|
|
R-3500 Frequency ranges:
|
Range 1: radio 15 kHz to 23 kHz
|
|
R-3500 Frequency ranges:
|
Range 2: power network 50 Hz / 60 Hz; optionally 100 Hz (can be adjusted by Amprobe service personnel)
|
|
R-3500 Frequency ranges:
|
Range 3: transmitter 32.768 kHz
|
|
R-3500 Sensitivity at a depth of 1m:
|
Range 1: radio >20 ìA
|
|
R-3500 Sensitivity at a depth of 1m:
|
Range 2: power network >7 mA
|
|
R-3500 Sensitivity at a depth of 1m:
|
Range 3: transmitter >5 ìA
|
|
R-3500 Power supply:
|
10 x IEC R6 / AA cell / Mignon
|
|
R-3500 Operating time:
|
40 hours (for intermittent use with alkaline batteries, 20 °C)
|
|
R-3500 Weight:
|
2.5 kg (5.51 lbs)
|
|
R-3500 Dimensions (W x H x D):
|
99 x 660 x 252 mm,(3.90 x 25.98x 9.92 in)
|
|
T-3500 Transmitted power:
|
0.1 W / 0.5 W (switchable)
|
|
T-3500 Frequency:
|
32.768 kHz
|
|
T-3500 Power supply:
|
6 x IEC R20 / D cell / Mono
|
|
T-3500 Operating time:
|
40 hours (for intermittent use with alkaline batteries, 20 °C)
|
|
T-3500 Weight:
|
1.7 kg (3.75 lbs.)
|
|
T-3500 Dimensions (W x H x D):
|
260 x 255 x 140 mm (10.24 x 10.04 x 5.5 in)
|
|
T-3500 Type of protection in accordance with EN 60529:
|
Dust and water protected IP 56
|
Included Accessories: Receiver, transmitter, connection cables, ground stake, carrying case, users manual, batteries(installed) |
|
|
|