|
| | |
|
| |
| | |
|
|
Martel Electronics DMC-1410 Documenting Multifunction Calibrator
|
Item Number: DMC-1410
Manufacturer: Martel Electronics
Part Number: 1920002
Product Options
Martel DMC-1410 Calibration Options
|
|
Martel Electronics DMC-1410 Documenting Multifunction Calibrator The Martel DMC 1410 documenting calibrator
is a highly accurate, portable hand-held calibrator providing functions
and accuracy associated with fixed installation, laboratory
instruments, and has everything needed for virtually any calibration
task.
The
DMC-1410 Calibrator fully documents any calibration easily while
performing the normal job. No special software is required! It features
the ability to test for pass/fail criteria, measure and simulate
thermocouples, RTDs, current, voltage, frequency, and source pulse
trains.
In addition, the built-in 250 Ohm resistor for HART compatibility
with smart pulse type transmitters and PLCs, full fuseless protection, and a serial
communications port for full control with ASCII commands.
The Martel DMC-1410 Calibrator Features
:
- Simple, straight forward, Intuitive user interface
- New ClearBrite Graphic Display
- New streamlined case design
- Easy to learn yet powerful 3 Key Martel Menu System
- Maintain calibration data for 50 instruments in non-volatile memory
- Print calibration certificates without PC
- Communications port compatible with BetaPort-P pressure modules
- All source modes can be programmed with dedicated set-points
- Built-in 250 Ohm resistor for HART compatibility with smart transmitters and PLCs
- Direct entry of custom RTD coefficients (R0,A,B,C)
- Meets CE Requirements and is designed to IEC 1010 safety standards
- Includes Full Rubber boot, test leads, and factory test report
Pressure Measurement Capabilities - Martel Electronics offers 27 standard pressure modules, covering gauge, vacuum, absolute, compound, and differential measurements. All modules are directly compatible with the Beta-Gauge II.With the Model BPPA-100 Pressure Module Adapter, all modules (with the exceptionof the DC measurement model) are fully compatible with the Martel MC-1210 and MC-1010 Multi-Function Calibrators, the BetaGauge 330, 321A, 311A and 301 Pressure Calibrators, the DMC-1410 Documenting Multi-Function Calibrator, and the Martel Electronics M2001 and 3001 Laboratory/Bench Standards. Pressure ranges may be displayed in any of 13 user selectable units.Water density correction factors of 4 °C, 20 °C, or 60 °F can be selected for either water column unit. The choice of pressure unit may be restricted by limitations on resolution of the instrument display of the particular calibrator the module is used with. For optimum mechanical strength, external pressure connection is made by a 1/8” FNPT 316SS connector welded to a stainless steel metal plate.
 |
Our Price: Starting at $60.00
The Seahorse Hurricane Series SE-520 hard case is IP6 certified, watertight, airtight, dustproof, and available in a variety of colors with or without pick and pluck foam.
|
By using the Beta-Martel Model BPPA-100 BETA Port Pressure Adapter, beta pressure modules are fully compatible with the Martel DMC-1410, MC-1210, MC-1010, M3001, Betagauge 330, Betagauge 311A/321A, Betagauge 301, M2001
|
The Martel Beta Port-P Pressure Module allows pressure calibration and measurement functionality to be added the most Martel Process, pressure and bench-top calibrators. Ranges from 10" Water to 10,000 PSIG are available.
| |
|
|
|