Fluke PV350 Pressure Vacuum Module

The Fluke PV350 measures gauge pressure or vacuum applied to the pressure port on the transducer. It then converts that measurement to 1mV dc per unit. The PV350 utilizes a sealed 316 stainless steel sensor and is compatible with industrial gases and liquids.  The DMM has to have input impedance of 10 M-ohms. 

• Pressure Range: 0.5 to 350 psig (3.447 to 2413 kPa) 
• Vacuum Range: 0 to 29.9 inch Hg (0 to 76cm Hg)
• Basic Accuracy: Pressure: +/-(1% of reading + 0.3 psig)
• Basic Accuracy: Vacuum: +/-(1% of reading + 0.5 inch Hg) 
• Output Signal: 1mV per unit (psi, kPa, cm-Hg, in-Hg) 
• Maximum Working Pressure: 500 psi 
• Pressure Port Connection: ¼ inch MNPT 
• Cable Length: 8 feet 
• Safety Standards: Complies requirements of ANSI/ISA S82.03-1988. 
• Protection Class III per IEC 1010-1-1990. Annex H.
• Optional calibration certifcate available to meet ISO 9001 or ISO 17025